主管:中国科学院
主办:中国优选法统筹法与经济数学研究会
   中国科学院科技战略咨询研究院

中国管理科学 ›› 2018, Vol. 26 ›› Issue (11): 153-165.doi: 10.16381/j.cnki.issn1003-207x.2018.11.016

• 论文 • 上一篇    下一篇

面向服务的复杂成形装备产品架构设计与优化

严建文1,2,3, 袁成明2, 张强1, 范煜2,3   

  1. 1. 合肥工业大学管理学院, 安徽 合肥 230009;
    2. 合肥工业大学工业与装备技术研究院, 安徽 合肥 230009;
    3. 合肥合锻智能制造股份有限公司, 安徽 合肥 230601
  • 收稿日期:2017-03-04 修回日期:2017-06-22 出版日期:2018-11-20 发布日期:2019-01-23
  • 通讯作者: 范煜(1989-),男(汉族),浙江桐乡人,合肥工业大学工业与装备技术研究院,助理研究员,研究方向:智能制造工程管理,E-mail:yufan@hfut.edu.cn. E-mail:yufan@hfut.edu.cn
  • 基金资助:

    国家自然科学基金资助项目(71501055,71601066);中央高校基本科研业务费专项资金资助项目(JZ2017HGBZ0923);安徽省博士后科研活动经费资助项目(2018B257)

Design and Optimization of the Complex Forming Equipment's Product Architecture with Service-oriented

YAN Jian-wen1,2,3, YUAN Cheng-ming2, ZHANG Qiang1, FAN Yu2,3   

  1. 1. School of Management, Hefei University of Technology, Hefei 230009, China;
    2. Institute of Industry & Equipment Technology, Hefei University of Technology, Hefei 230009, China;
    3. Hefei Metalforming Intelligent Manufacturing Co, LTD, Hefei 230601, China
  • Received:2017-03-04 Revised:2017-06-22 Online:2018-11-20 Published:2019-01-23

摘要: 复杂成形装备作为高端制造产业的基础装备,是各产业转型升级和技术进步的重要保障。同时快速发展的互联网与大数据等新兴信息技术已经成为装备制造业创新不可或缺的组成部分,极其深刻地影响着复杂成形装备产业的制造模式、发展战略以及产品的开发方式。本文研究了面向服务的复杂成形装备产品架构设计与优化方法。采用公理化设计的域结构思想,建立需求域、功能域和架构域之间的映射关系;提出了基于QFD的功能生成方法以及功能模型约简方法;利用DMM建立产品架构和服务架构之间的关联关系;利用模块化理论方法,并考虑成本因素对产品架构进行优化。

关键词: 服务, 复杂成形装备, 架构设计与优化, 质量功能展开

Abstract: Complex forming equipment is the foundation of high-end manufacturing industry, and it is an important guarantee for the industrial upgrading and the technological progress. The rapid developing information technologies, such as Internet and Big data, have become an indispensable part of the equipment manufacturing industry. The design and optimization of the complex forming equipment's product architecture with service-oriented is studied. Through the analysis of characteristics of design architectures of complex forming equipment in the Internet and Big data era, a framework of product architecture is established as the corresponding relationships between the requirement domain, the function domain and the architecture domain. Thus, the product-service modeling methods and integration framework of complex forming equipment based on QFD and DSM are proposed. The modularization optimization method is also developed with the consideration of the operation costs.

Key words: service, complex forming equipment, the design and optimization of product architecture, quality function deployment

中图分类号: