基于运行过程失效预防的重大装备并联型关键系统定期维修模型

doi:10.16381/j.cnki.issn1003-207x.2023.0245

Abstract

Abstract:

Most of the preventive maintenance researches just focus on the whole life the systems but ignore the operation process. For some major equipment， they can not be always in working condition and might be shut down in most time. Therefore， the high reliability in the whole life dose not mean that the systems have high reliability during the operation process. Nowadays， some scholas have integrated the operation duration into the preventive maintenance models and proved that if the operation duration is considered， the maintenance policies can be more effective to guarantee high reliability for the systems. However， the related works just considered the one-unit system. Then， in order to prevent failure of parallel critical system when the major equipment is operating， the operation duration is considered into the present model， and a periodic maintenance model of parallel critical system for major equipment is proposed to prevent the failure during the operation process. Firstly， a periodic maintenance model of parallel critical system for major equipment with operation duration is formulated. Then， in order to balance the trade-off between the cost and maintainability， the periodic maintenance optimized models of parallel critical system for major equipment with scheduled replacement principle are formulated， according to replacement first and replacement last. Via the numerical examples， the optimum numbers of the units would be underestimated if the operation duration is not considered. In reliability theory， the smaller numbers of the units of the parallel systems would lead to the lower reliability. It verifies that the proposed models can be more effective to guarantee the high reliability. Finally， the suggested models are illustrated in maintaining the electrical system of a large ship based on the assumed data， which presents the analysis process of optimal polices and provide the decision-makers with the suggestions when they study the similar problems.

Key words: operation duration, major equipment, parallel critical system, periodic maintenance model, scheduled replacement principle

CLC Number:

TP273

Qin Zhang,Peng Xu,Zhigeng Fang, et al. Periodic Maintenance Model of Parallel Critical System for Major Equipment to Prevent the Failure During the Operation Process[J]. Chinese Journal of Management Science, 2025, 33(10): 67-75.

Figures/Tables 11

$c 1$	$t x = 0$		$t x = 0.3$		$t x = 0.6$		$t x = 0.9$
$c 1$	$n *$	$C (t x, n *)$	$n *$	$C (t x, n *)$	$n *$	$C (t x, n *)$	$n *$	$C (t x, n *)$
10.0	5	107.635	6	97.049	7	92.269	8	90.703
15.0	4	129.952	5	117.527	6	111.948	6	109.853
20.0	3	149.036	4	134.125	5	127.814	5	125.318
25.0	3	164.036	4	149.510	4	141.302	5	138.476
30.0	3	179.036	3	161.447	4	153.802	4	149.763
35.0	2	192.741	3	172.985	3	164.597	4	160.289
40.0	2	202.741	3	184.523	3	173.972	3	169.858
45.0	2	212.741	2	195.449	3	183.347	3	177.753

$c 1$	$n = 2$		$n = 3$		$n = 4$		$n = 5$
$c 1$	$T f *$	$C f (t x, n; T f *)$	$T f *$	$C f (t x, n; T f *)$	$T f *$	$C f (t x, n; T f *)$	$T f *$	$C f (t x, n; T f *)$
10.0	0.385	117.567	0.550	89.569	0.724	78.825	0.893	74.590
15.0	0.522	132.099	0.706	106.557	0.909	97.736	1.109	95.434
20.0	0.665	143.909	0.863	121.115	1.095	114.403	1.328	114.151
25.0	0.820	153.987	1.029	134.050	1.292	129.538	1.566	131.389
30.0	0.995	162.839	1.211	145.792	1.514	143.522	1.843	147.503
35.0	1.199	170.766	1.420	156.606	1.775	156.594	2.191	162.714
40.0	1.448	177.964	1.669	166.665	2.106	168.915	2.686	177.172
45.0	1.772	184.567	1.988	176.094	2.572	180.599	3.616	190.987

$c 1$	$T = 1.0$		$T = 1.5$		$T = 2.0$		$T = 2.5$
$c 1$	$n f *$	$C f (t x, n f *; T)$	$n f *$	$C f (t x, n f *; T)$	$n f *$	$C f (t x, n f *; T)$	$n f *$	$C f (t x, n f *; T)$
10.0	6	73.629	7	75.476	8	79.506	8	83.024
15.0	5	95.747	6	96.880	6	100.099	6	103.315
20.0	4	114.621	5	114.493	5	117.168	5	119.869
25.0	4	131.273	4	129.974	5	132.385	5	134.204
30.0	3	146.556	4	143.524	4	144.595	4	146.201
35.0	3	159.046	3	156.648	4	156.769	4	157.668
40.0	3	171.535	3	166.810	3	166.964	3	167.788
45.0	3	184.024	3	176.972	3	176.095	3	176.389

$c 1$	$n = 2$		$n = 3$		$n = 4$		$n = 5$
$c 1$	$T l *$	$C l (t x, n; T l *)$	$T l *$	$C l (t x, n; T l *)$	$T l *$	$C l (t x, n; T l *)$	$T l *$	$C l (t x, n; T l *)$
10.0	0.900	149.072	1.052	122.464	1.194	107.458	1.327	98.396
15.0	0.989	154.331	1.150	130.281	1.313	117.683	1.470	110.859
20.0	1.090	159.568	1.259	138.005	1.444	127.692	1.624	122.934
25.0	1.205	164.754	1.380	145.593	1.588	137.421	1.794	134.541
30.0	1.339	169.853	1.517	152.996	1.749	146.803	1.985	145.603
35.0	1.498	174.819	1.673	160.161	1.932	155.772	2.202	156.044
40.0	1.687	179.600	1.853	167.029	2.143	164.260	2.455	165.792
45.0	1.917	184.134	2.064	173.541	2.392	172.200	2.761	174.772

$c 1$	$T = 1.0$		$T = 1.5$		$T = 2.0$		$T = 2.5$
$c 1$	$n l *$	$C l (t x, n l *; T)$	$n l *$	$C l (t x, n l *; T)$	$n l *$	$C l (t x, n l *; T)$	$n l *$	$C l (t x, n l *; T)$
10.0	8	90.528	9	87.384	10	86.304	12	89.003
15.0	6	109.686	7	106.516	8	105.716	9	108.529
20.0	5	125.157	6	122.106	7	121.427	7	123.912
25.0	5	138.281	5	135.271	6	134.508	6	136.431
30.0	4	149.598	4	147.240	5	145.605	5	147.296
35.0	4	160.098	4	157.002	4	155.801	5	156.549
40.0	3	169.719	4	166.763	4	164.374	4	164.845
45.0	3	177.593	3	174.962	4	172.947	4	172.247

References 25

[1]	de Smidt-Destombes K S， van der Heijden M C， van Harten A. Availability of k-out-of- N systems under block replacement sharing limited spares and repair capacity［J］. International Journal of Production Economics， 2007， 107（2）： 404-421.
[2]	陈曦. 基子RCM方法的高温气冷堆核电站电气设备维修策略改进［D］. 济南：山东大学硕士学位论文， 2020.
	Chen X. Improvement of maintenance strategy for electrical equipment of HTR-PM based on RCM［D］. Jinan： Master Dissertation of Shandong University， 2020.
[3]	苏春，周小荃. 基于有效年龄的风力机多部件维修优化［J］.东南大学学报（自然科学版），2012， 42（6）： 1100-1104.
	Su C， Zhou X Q. Maintenance optimization for multi-component of wind turbine based on effective age［J］. Journal of Southeast University （Natural Science Edition）， 2012， 42（6）： 1100-1104.
[4]	王红，熊律，杜维鑫，等. 考虑故障风险的动车组部件预防性维护优化建模［J］. 机械工程学报， 2016， 52（24）： 123-129.
	Wang H， Xiong L， Du W X， et al. Optimization of preventive maintenance for component of electric multiple unit with consideration of failure risk［J］. Journal of Mechanical Engineering， 2016， 52（24）： 123-129.
[5]	陈童，谢经伟. 面向预防性维修的两种失效竞争下多状态系统可靠性模型［J］. 系统工程理论与实践， 2020， 40（3）： 807-816.
	Chen T， Xie J W. Reliability analysis of multi-state system with competing failure based on preventive maintenance［J］. Systems Engineering-Theory & Practice， 2020， 40（3）： 807-816.
[6]	Yang L， Ye Z S， Lee C G， et al. A two-phase preventive maintenance policy considering imperfect repair and postponed replacement［J］. European Journal of Operational Research， 2019， 274（3）： 966-977.
[7]	Ouaret S， Kenné J P， Gharbi A. Production and replacement policies for a deteriorating manufacturing system under random demand and quality［J］. European Journal of Operational Research， 2018， 264（2）： 623-636.
[8]	Schouten T N， Dekker R， Hekimoğlu M， et al. Maintenance optimization for a single wind turbine component under time-varying costs［J］. European Journal of Operational Research， 2022， 300（3）： 979-991.
[9]	Jiang R. A novel two-fold sectional approximation of renewal function and its applications［J］. Reliability Engineering & System Safety， 2020， 193： 106624.
[10]	张新生，张平. 不完全维修下海底腐蚀管道剩余寿命预测［J］.系统工程理论与实践， 2019， 39（11）： 2984-2994.
	Zhang X S， Zhang P. Remaining useful life prediction of corroded submarine pipelines under imperfect maintenance［J］. Systems Engineering-Theory & Practice， 2019， 39（11）： 2984-2994.
[11]	Zhao X， Cai J， Mizutani S， et al. Preventive replacement policies with time of operations， mission durations， minimal repairs and maintenance triggering approaches［J］.Journal of Manufacturing Systems，2021，61： 819-829.
[12]	Zhang Q， Fang Z， Cai J. Extended block replacement policies with mission durations and maintenance triggering approaches［J］. Reliability Engineering & System Safety， 2021， 207： 107399.
[13]	Zhang Q， Fang Z， Cai J. Preventive replacement policies with multiple missions and maintenance triggering approaches［J］. Reliability Engineering & System Safety， 2021， 213： 107691.
[14]	Peng R， He X， Zhong C， et al. Preventive maintenance for heterogeneous parallel systems with two failure modes［J］. Reliability Engineering & System Safety， 2022， 220： 108310.
[15]	Barros A， Grall A， Berenguer C. Joint modelling and optimization of monitoring and maintenance performance for a two-unit parallel system［J］. Proceedings of the Institution of Mechanical Engineers， Part O： Journal of Risk and Reliability， 2007， 221（1）： 1-11.
[16]	徐智斌. 船舶电站冗余控制系统设计及可靠性分析［D］. 大连：大连海事大学硕士学位论文， 2020.
	Xu Z B. Design and reliability analysis of redundancy control system of marine power station［D］. Dalian： Master Dissertation of Dalian Maritime University， 2020.
[17]	李京峰，陈云翔，项华春，等. 考虑随机冲击影响的多部件系统视情维修与备件库存联合优化［J］. 系统工程与电子技术， 2022， 44（3）： 875-883.
	Li J F， Chen Y X， Xiang H C， et al. Joint optimization of condition-based maintenance and spare part inventory for multi-component system considering random shock effect［J］. Systems Engineering and Electronics， 2022， 44（3）： 875-883.
[18]	杨建华，韩梦莹. 视情维修条件下k/N（G）系统备件供需联合优化［J］. 系统工程与电子技术， 2019， 41（9）： 2148-2156.
	Yang J H， Han M Y. Joint optimization of spare parts supply-demand for k/N（G） system under condition-based maintenance［J］. Systems Engineering and Electronics， 2019， 41（9）： 2148-2156.
[19]	李美娜，孟宪云，李晋星，等. 基于休假时间和基准可靠度的冷贮备二维预防维修策略［J］. 系统科学与数学， 2017， 37（11）： 2281-2292.
	Li M N， Meng X Y， Li J X， et al. The two dimensional preventive maintenance strategy for a cold standby system based on vacation and critical reliability［J］. Journal of Systems Science and Mathematical Sciences， 2017， 37（11）： 2281-2292.
[20]	杨天枢，高文科. 基于拓展几何过程的冷贮备系统维修策略优化［J］. 计算机集成制造系统， 2022， 28（1）： 84-92.
	Yang T S， Gao W K. Optimization of maintenance policy for cold standby system based on extended geometric process［J］. Computer Integrated Manufacturing Systems， 2022， 28（1）： 84-92.
[21]	Safaei F， Châtelet E， Ahmadi J. Optimal age replacement policy for parallel and series systems with dependent components［J］. Reliability Engineering & System Safety， 2020， 197： 106798.
[22]	Nakagawa T. Random maintenance policies［M］. London： Springer， 2014.
[23]	Eryilmaz S. A Note on optimization problems of a parallel system with a random number of units［J］. International Journal of Reliability Quality & Safety Engineering，2017，24（5）： 1750022.
[24]	Yusuf I. Reliability modelling of a parallel system with a supporting device and two types of preventive maintenance［J］.International Journal of Operational Research， 2016， 25（3）： 269.
[25]	Dong W， Liu S， Cao Y， et al. Reliability modeling and optimal random preventive maintenance policy for parallel systems with damage self-healing［J］. Computers & Industrial Engineering， 2020， 142： 106359.

Related Articles 15

[1]	Guiqin Xue, Xianlong Ge. Study on Two-stage Dynamic Vehicle Scheduling Optimization Considering the Proactive Category [J]. Chinese Journal of Management Science, 2024, 32(12): 164-172.
[2]	Zheng Wang,Peng Lu,Xiangpei Hu. Method of Locating Racks in Mobile-Rack Warehousing System [J]. Chinese Journal of Management Science, 2024, 32(8): 84-94.
[3]	Tieke Li,Yixuan Su,Wenxin Zhang,Bailin Wang. Interval Multi-objective Optimal Scheduling for Steelmaking-continuous Casting with Processing Time Uncertainty [J]. Chinese Journal of Management Science, 2024, 32(8): 95-106.
[4]	Guohua Wu. Based on Hub-Spoke Network a Practice Heuristic Algorithm Applied to Airline Fleet Assignment [J]. Chinese Journal of Management Science, 2024, 32(1): 158-167.
[5]	Hai-yu WANG. Economic-statistical Optimization Design of Dynamic $n p x$ Control Chart Based on Simply Inspection [J]. Chinese Journal of Management Science, 2023, 31(9): 205-213.
[6]	ZHAI Meng-yue, WANG Zheng, LI Yan-tong, HU Xiang-pei. Research on the Problem of Allocating Commodity Storage Locations in a Mobile-rack Storage System [J]. Chinese Journal of Management Science, 2023, 31(3): 167-176.
[7]	LIU Lang, , WANG Hui, HUANG Dong-hong. The Buy-back Contract of Supplier Risk Aversion under the Asymmetric Information of Sales Cost [J]. Chinese Journal of Management Science, 2023, 31(1): 158-167.
[8]	WU Jiang-hua, JIANG Fan. Vertical Information Acquisition and Horizontal Information Sharing Strategy in a Supply Chain [J]. Chinese Journal of Management Science, 2021, 29(8): 161-173.
[9]	CAO Xiao-ning, WANG Yong-ming, XUE Fang-hong, LIU Xiao-bing. Coordination Strategies for Dual-channel Supply Chain of Fresh Agricultural Products Considering the Fresh-keeping Effort of Supplier [J]. Chinese Journal of Management Science, 2021, 29(3): 109-118.
[10]	LIU Lang, WU Shuang-sheng, SHI Wen-qiang. Research on Emergency Quantity Discount Contract with Stochastic Price under Asymmetric Information [J]. Chinese Journal of Management Science, 2018, 26(3): 169-176.
[11]	ZHANG Han-jiang, YU Hua-ying, LI Cong-ying. Incentive Contract Design and Optimization Of Government Subsidies Policy in the Closed-loop Supply Chain [J]. Chinese Journal of Management Science, 2016, 24(8): 71-78.
[12]	XING Xi-wen, MAO Jun, ZHANG Rui, JIN Zhi-hong. Optimization of Container Loading/unloading Integrated Scheduling in a Container Terminal Based on Hybrid Flowshop [J]. Chinese Journal of Management Science, 2014, 22(10): 97-105.
[13]	JIN Peng, ZUO Chun-rong, YANG Shan-lin, MA Hua-wei. Cutting Stock Problem and Transportation Problem Collaboration Optimization Modeling [J]. Chinese Journal of Management Science, 2013, (2): 91-97.
[14]	LIU Chun-ling, LI Ji-zi, MENG Bo. Research on H_∞ Control of Bullwhip in Cluster Supply Chains Based on Cooperation between Two Single Chains [J]. Chinese Journal of Management Science, 2007, 15(1): 41-46.
[15]	LIU Bin, HE Jian-min, CAO Hui-yu. Rebuilding PSG Fuzzy Decision-making System Using SVD Method [J]. Chinese Journal of Management Science, 2005, (3): 103-107.

Periodic Maintenance Model of Parallel Critical System for Major Equipment to Prevent the Failure During the Operation Process

RichHTML

PDF (PC)

Knowledge

Abstract

Cite this article

share this article

Figures/Tables 11

References 25

Related Articles 15

Metrics

Comments

Recommended 0