逆向物流网络设计研究进展

doi:10.16381/j.cnki.issn1003-207x.2016.09.020

摘要/Abstract

摘要： 随着环境资源压力的增大，政府法制要求以及社会环保要求的提升，研究者对逆向物流网络的研究日益关注。本文系统地对近几年的逆向物流网络设计研究进行回顾，讨论并对比研究了网络设计研究问题，研究方法，定量模型，求解算法以及逆向物流网络设计中不确定环境方面的研究。探讨了逆向物流网络研究中的不足，为研究者未来的研究方向提供了参考。

关键词: 逆向物流网络, 网络设计, 文献综述, 数学规划模型, 不确定环境

Abstract: Reverse Logistics networks is receiving much attention due to increasing pressure on environmental resources and growing requirements with government and public. There is abounding literature in the research area of reverse logistics network since Stock proposed the definition of reverse logistics in 1992. It is becoming a research hotspot in reverse logistics and operations management research.
Compared to logistics network, the reverse logistics system is more complicated due to the uncertainty of recycling time, location, and quantity. The complexity and significance of the reverse logistics network have drawn the attention of researchers. The purpose of this paper is to review relevant studies in the reserve logistics network in the world to present the progress of the studies.
In this paper, the reverse logistics network design is investigated. A comparative study of the network design issues, research methods, quantitative models, and algorithm is reviewed and made. Moreover, the research on uncertainty in reverse logistics network design is investigated.
Regarding the network design issues, studies according to reprocessing methods including remanufacturing, reuse, repair, recycling, commercial returns, and disposal are discussed. In addition, the studies are divided into independent reverse logistics network design and closed or integrated forward/reverse logistics network design according to the relationship between forward and reverse logistics operation. After reviewing, it is represented that recycling network is the independent reverse network. Other kinds of networks are integrated forward/reverse network which is perusing economic of operation.
In terms of research method, literature are reviewed from case studies, mathematical programming, and simulation method. Especially, as the primary characteristics of reverse logistics are the uncertainty, literature involved in risk environment are reuiewed to conclude the uncertainty factors and method to deal with it. The weakness of reverse logistics network design lies in the study under the uncertainty environment and it is the main research direction of the future research.
At last, the deficiencies in recent studies were identified and a reference is suggested for future research which will help researchers understanding the present research in reverse logistics network design and provide a reference for their future studies.

Key words: reverse logistics networks, network design, literature review, quantitative models, uncertainty

中图分类号:

F273

张群, 卫李蓉. 逆向物流网络设计研究进展[J]. 中国管理科学, 2016, 24(9): 165-176.

ZHANG Qun, WEI Li-rong. Advances in Reverse Logistics Network Design Research[J]. Chinese Journal of Management Science, 2016, 24(9): 165-176.

参考文献

[1] Fleischmann M, Beullens P, Bloemhof-Ruwaard J M, et al. The impact of product recovery on logistics network design[J]. Production and Operations Management, 2001, 10(2): 156-173.

[2] 周垂日,梁樑,许传永,等. 逆向物流研究的新进展:文献综述[J]. 科研管理, 2007,28(3): 123-132.

[3] Fleischmann M, Bloemhof-Ruwaard J M, Dekker R, et al. Quantitative models for reverse logistics: A review[J]. European Journal of Openational Research, 1997: 103(1):1-17.

[4] Lambert S, Riopel D, Abdul-Kader W. A reverse logistics decisions conceptual framework[J]. Computers & Industrial Engineering, 2011, 61(3): 561-581.

[5] 周根贵,曹振宇. 遗传算法在逆向物流网络选址问题中的应用研究[J]. 中国管理科学, 2005,13(1): 43-48.

[6] Fleischmann M, Krikke H R, Dekker R, et al. A characterisation of logistics networks for product recovery[J]. Omega, 2000, 28(6): 653-666.

[7] Thierry M, Salomon M, Van Nunen J, et al. Strategic issuses in product recovery management[J]. California Management Review, 1995,37(2): 114-135.

[8] Lee J, Gen M, Rhee K. Network model and optimization of reverse logistics by hybrid genetic algorithm[J]. Computers & Industrial Engineering, 2009, 56(3): 951-964.

[9] Zarei M, Mansour S, Kashan A H, et al. Designing a reverse logistics network for end-of-life vehicles recovery[J]. Mathematical Problems in Engineering, 2010, 2010: 1-16.

[10] Alumur S A, Nickel S, Saldanha-Da-Gama F, et al. Multi-period reverse logistics network design[J]. European Journal of Operational Research, 2012, 220(1): 67-78.

[11] 王圣池,杨斌,许波桅,等. 考虑自贸区的再制造物流网络设计[J]. 计算机集成制造系统, 2015,(06): 1609-1616.

[12] 马祖军,代颖. 再制造物流网络优化设计的扩展模型[J]. 交通运输工程学报, 2007, 7(3): 121-126.

[13] 马祖军,代颖,刘飞. 制造/再制造混合系统中集成物流网络优化设计模型研究[J]. 计算机集成制造系统, 2005,(11): 1551-1557.

[14] Kroon L, Vrijens G. Returnable containers: An example of reverse logistics[J]. International Journal of Physical Distribution & Logistics Management, 1995, 25(2): 56-68.

[15] 何波,杨超. 基于成本/服务权衡的逆向物流网络设计问题研究[J]. 中国管理科学, 2008,16(4): 90-95.

[16] Zhou Yongsheng, Wang Shouyang. Generic model of reverse logistics network design[J]. Journal of Transportation Systems Engineering and Information Technology, 2008, 8(3): 71-78.

[17] Barros A I, Dekker R, Scholten V. A two-level network for recycling sand: A case study[J]. European Journal of Operational Research, 1998, 110(2): 199-214.

[18] Louwers D, Kip B J, Peters E, et al. A facility location allocation model for reusing carpet materials[J]. Computers & Industrial Engineering, 1999, 36(4): 855-869.

[19] Ammons J C, Realff M J, Newton D. Reverse production system design and operation for carpet recycling[R].Technical Report,Georgia Institute of Technology, 1997.

[20] Min H. A bicriterion reverse distribution model for product recall[J]. Omega, 1989, 17(5): 483-490.

[21] Min H, Jeung Ko H, Seong Ko C. A genetic algorithm approach to developing the multi-echelon reverse logistics network for product returns[J]. Omega, 2006, 34(1): 56-69.

[22] Li Yanhui, Guo Hao, Wang Lin, et al. A hybrid genetic-simulated annealing algorithm for the location-inventory-routing problem considering returns under e-supply chain environment[J]. The Scientific World Journal, 2013, 2013: 1-10.

[23] Kim J, Lee D. A restricted dynamic model for refuse collection network design in reverse logistics[J]. Computers & Industrial Engineering, 2013, 66(4): 1131-1137.

[24] Hu T L, Sheu J B, Huang K H. A reverse logistics cost minimization model for the treatment of hazardous wastes[J]. Transportation Research Part E:logistics and Tnansportation Review, 2002, 38(6): 457-473.

[25] 何波,杨超,张华,等. 固体废弃物逆向物流网络优化设计[J]. 系统工程, 2006,24(8): 38-41.

[26] 何波,杨超,张华. 废弃物回收的多层逆向物流网络优化设计问题研究[J]. 中国管理科学, 2007, 15(3): 61-67.

[27] 何波,杨超,杨珺. 废弃物逆向物流网络设计的多目标优化模型[J]. 工业工程与管理, 2007,12(5): 43-46.

[28] El-Sayed M, Afia N, El-Kharbotly A. A stochastic model for forward-reverse logistics network design under risk[J]. Computers & Industrial Engineering, 2010, 58(3): 423-431.

[29] Khajavi L T. An integrated forward/reverse logistics network optimization model for multi-stage capacitated supply chain[J]. iBusiness, 2011, 3(2): 229-235.

[30] Keyvanshokooh E, Fattahi M, Seyed-Hosseini S M, et al. A dynamic pricing approach for returned products in integrated forward/reverse logistics network design[J]. Applied Mathematical Modelling, 2013, 37(24): 10182-10202.

[31] Jeihoonian M, Kazemi Zanjani M, Gendreau M. Accelerating benders decomposition for closed-loop supply chain network design: Case of used durable products with different quality levels[J]. European Journal of Operational Research, 2016, 251(3): 830-845.

[32] Soleimani H, Kannan G. A hybrid particle swarm optimization and genetic algorithm for closed-loop supply chain network design in large-scale networks[J]. Applied Mathematical Modelling, 2015, 39(14): 3990-4012.

[33] 董景峰,王刚,吕民,等. 产品回收多级逆向物流网络优化设计模型[J]. 计算机集成制造系统, 2008, 14(1): 33-38.

[34] 马祖军,代颖. 产品回收逆向物流网络优化设计模型[J]. 管理工程学报, 2005, 19(4): 114-117.

[35] 李锐,黄敏,王兴伟. 多周期的第四方物流弹复性正逆向集成网络设计模型与算法[J]. 系统工程理论与实践, 2015,35(4): 892-903.

[36] Kroon L, Vrijens G. Returnable containers: an example of reverse logistics[J]. International Journal of Physical Distribution & Logistics Management, 1996,25(2): 56-68.

[37] Jayaraman V, Guide V D R, Srivastava R. A closed-loop logistics model for remanufacturing[J]. The Journal of the Operational Research Society, 1999, 50(5): 497-508.

[38] Lau K H, Wang Yiming. Reverse logistics in the electronic industry of China: A case study[J]. Supply Chain Management: An International Journal, 2009, 14(6): 447-465.

[39] Cruz-Rivera R, Ertel J. Reverse logistics network design for the collection of End-of-Life Vehicles in Mexico[J]. European Journal of Operational Research, 2009, 196(3): 930-939.

[40] Achillas C, Vlachokostas C, Aidonis D, et al. Optimising reverse logistics network to support policy-making in the case of electrical and electronic equipment[J]. Waste Management, 2010, 30(12): 2592-2600.

[41] Savaskan R C, Van Wassenhove L N. Reverse channel design: The case of competing retailers[J]. Management Science, 2006, 52(1): 1-14.

[42] Min H, Ko H J. The dynamic design of a reverse logistics network from the perspective of third-party logistics service providers[J]. International Journal of Production Economics, 2008, 113(1): 176-192.

[43] Qian Xiaoyan, Han Yong, Dan Qinli, et al. Reverse logistics network design model based on e-commerce[J]. International Journal of Organizational Analysis, 2012, 20(2): 251-261.

[44] K H J,Evans G W.A genetic algorithm-based heuristic for the dynamic integrated forward/reverse logistics network for 3PLs[J].Computers & Operations Research,2007,34(2):346-366.

[45] Min H, Jeung Ko H, Seong Ko C. A genetic algorithm approach to developing the multi-echelon reverse logistics network for product returns[J]. Omega, 2006, 34(1): 56-69.

[46] Salema M I G, Barbosa-Povoa A P, Novais A Q. An optimization model for the design of a capacitated multi-product reverse logistics network with uncertainty[J]. European Journal of Operational Research, 2007, 179(3): 1063-1077.

[47] Kim J, Lee D. An integrated approach for collection network design, capacity planning and vehicle routing in reverse logistics[J]. Journal of the Operational Research Society, 2013, 66(1): 76-85.

[48] 戢守峰,李峰,董云龙,等. 基于遗传算法的三级逆向物流网络设计模型研究[J]. 中国管理科学, 2007,15(6): 86-91.

[49] 李波,曾成培. 一种逆向物流网络的多期动态选址方法[J]. 管理科学学报, 2008, 11(5): 76-84.

[50] 何波,孟卫东. 考虑顾客选择行为的逆向物流网络设计问题研究[J]. 中国管理科学,2009, 17(6): 104-108.

[51] 周向红,高阳,任剑,等. 政府补贴下的再制造逆向物流多目标选址模型及算法[J]. 系统工程理论与实践, 2015,35(8): 1996-2003.

[52] Tuzkaya G, Gülsün B, önsel ?. A methodology for the strategic design of reverse logistics networks and its application in the Turkish white goods industry[J]. International Journal of Production Research, 2011, 49(15): 4543-4571.

[53] Hatefi S M, Jolai F. Robust and reliable forward-reverse logistics network design under demand uncertainty and facility disruptions[J]. Applied Mathematical Modelling, 2014, 38(9-10): 2630-2647.

[54] Vahdani B, Tavakkoli-Moghaddam R, Modarres M, et al. Reliable design of a forward/reverse logistics network under uncertainty: A robust-M/M/c queuing model[J]. Transportation Research Part E: Logistics and Transportation Review, 2012, 48(6): 1152-1168.

[55] Suyabatmaz A Ç, Altekin F T, Sahin G. Hybrid simulation-analytical modeling approaches for the reverse logistics network design of a third-party logistics provider[J]. Computers & Industrial Engineering, 2014, 70: 74-89.

[56] Lee D, Dong Meng. Dynamic network design for reverse logistics operations under uncertainty[J]. Transportation Research Part E: Logistics and Transportation Review, 2009, 45(1): 61-71.

[57] Lieckens K, Vandaele N. Multi-level reverse logistics network design under uncertainty[J]. International Journal of Production Research, 2012, 50(1): 23-40.

[58] Hasani A, Zegordi S H, Nikbakhsh E. Robust closed-loop global supply chain network design under uncertainty: the case of the medical device industry[J]. International Journal of Production Research, 2014, 53(5): 1596-1624.

[59] Soleimani H, Govindan K. Reverse logistics network design and planning utilizing conditional value at risk[J]. European Journal of Operational Research, 2014, 237(2): 487-497.